Fault diagnosis for nonlinear aircraft based on control-induced redundancy - CentraleSupélec Access content directly
Conference Papers Year : 2010

Fault diagnosis for nonlinear aircraft based on control-induced redundancy

Abstract

A Fault Detection and Isolation (FDI) method for a generic 3D aircraft is presented. The behavior of the aircraft is described by a nonlinear control-affine model, which is closed-loop controlled by a classical guidance, navigation and control (GNC) algorithm. The proposed FDI procedure exploits the redundancy induced by this control module, along with the accelerations measured by the Inertial Measurement Unit (IMU). Estimates of first-order derivatives of some state variables are thus readily available and allow one to estimate the control inputs as achieved by the actuators. Since the computed control input sent to the actuator is known, it is possible to use the discrepancy between these two elements as a residual indicative of faults. This strategy is successfully applied to the proposed aeronautical benchmark to detect and isolate actuator faults affecting simultaneously flight control surfaces and propulsion.
Fichier principal
Vignette du fichier
SYSTOL38final.pdf (1.25 Mo) Télécharger le fichier
Origin : Files produced by the author(s)
Loading...

Dates and versions

hal-00520805 , version 1 (24-09-2010)

Identifiers

  • HAL Id : hal-00520805 , version 1

Cite

Julien Marzat, Hélène Piet-Lahanier, Frédéric Damongeot, Eric Walter. Fault diagnosis for nonlinear aircraft based on control-induced redundancy. IEEE Conference on Control and Fault-Tolerant Systems, SysTol'10, Oct 2010, Nice, France. 6 p. ⟨hal-00520805⟩
278 View
377 Download

Share

Gmail Facebook X LinkedIn More